Six metric sizes: M3, M4, M5, M6, M8 and M10, with a matching adapter and 5 aluminum rivet nuts for each size.
ThreadDriver™ Aluminum Rivet Nut Kit
Lightweight, rust-free threads in thin metal. 6 sizes from M3 to M10, set with the drill you already own.
Couldn't load pickup availability
1,300+ Garages Love ThreadDriver
"I could not reach behind the panel at all. ThreadDriver made the install simple and saved the day on my van build."
What's In The Kit
6 Rivet Nut Adapters — one matched to every size:
- M3
- M4
- M5
- M6
- M8
- M10
30 Aluminum Rivet Nuts — 5 of each size, so you can start the day it arrives
Organizer Case — every adapter and nut sorted in one clear case
Pick the adapter, thread on the nut, push it in the hole, hold the adapter with a wrench and run the drill. Reverse out and the threads are ready.
Will It Fit My Drill?
Yes. The adapters run on a regular cordless or corded drill. Hold the adapter steady with a wrench while the drill turns, then reverse out.
Tip: run the drill on low with the clutch set low and stop as soon as the nut seats. Over-tightening can strip the rivet nut threads.
Why Aluminum?
Aluminum rivet nuts are about 1/3 the weight of steel, never rust, and set with less force. On aluminum panels they match the metal, so there's no galvanic corrosion between two different metals.
Best for: van builds, trailers, boats & RVs, roof racks and light brackets.
Why Not Just Use Self-Tappers?
Self-tapping screws cut their own threads into the metal — in thin sheet metal there's barely anything to bite, so they spin, strip, and work loose with vibration. A rivet nut gives you real machine threads locked into the panel, so the bolt holds tight and can come out and go back in as many times as you need.
90-Day Money-Back Guarantee
Use it on your actual project. If ThreadDriver doesn't work for you within 90 days, email support@myamorra.com and we'll refund you in full.
Shipping Info
Most kits leave the warehouse in 1-3 business days after checkout.
US delivery: 8-12 days
International delivery:
- Canada: 7-8 days
- Australia: 8-12 days
- United Kingdom: about 9 days
Tracking is included once your kit ships.
ThreadDriver™ Aluminum Rivet Nut Kit

Why Make It Harder
Than It Has To Be?
Screws Stripping Out?
Self-tappers have nothing to bite in thin sheet metal, so they spin and strip. A rivet nut gives you real bolt threads that hold.
Can't Reach The Back?
Nut-and-bolt needs a second hand behind the panel. ThreadDriver sets from the front — one person, one side.
Loose After A Week?
Vibration backs screws out of thin metal. A bolt in a rivet nut stays tight, and comes out and goes back in whenever you need.
Use It Anywhere
You won't need it every day — but when a screw strips out or you need a solid mount in thin metal, nothing else does it this fast.
Boats & Pontoons
Van Builds
Trailers & Frames
RV Frames
Roof Racks
Truck ToolboxesHow It Works
Pick The Adapter
Choose the adapter that matches your rivet nut size, M3 to M10.
Thread On The Nut
Spin the aluminum rivet nut onto the adapter.
Push It In
Drop the nut into a hole drilled to fit the nut body, not the bolt.
Hold, Drill, Reverse Out
Hold the adapter with a wrench and run the drill. The nut crushes behind the metal and locks in. Reverse out: real bolt threads, ready to use.
Trusted By 1,300+ Garages
Van builders, off-roaders, mechanics and weekend DIYers use ThreadDriver to put strong threads where screws won't hold.

I got quoted way too much for a small bracket repair. This kit let me do it myself and the result looks pro.
Phoenix, AZ
Used it on thin bed metal where screws kept stripping out. This thing just works, first try every time.

I was worried about warping the panel, but it set the nut clean and tight. Exactly what I needed.
Columbus, OH
Used it for mounts inside my van and it made the whole project move quicker. Solid kit.
Salt Lake City, UT
I was ready to pay a shop after stripping the hole, but this kit handled it in minutes. Solid tool, solid result.

This adapter turned my drill into the fix I needed for a stripped panel. Fast, solid, and way cheaper than a shop quote.
Corvallis, OR
I have tried a few cheap tools and they were junk. This one finally gets the job done without drama.
Nashville, TN
Clean result, easy setup, and it stays in the truck now.
Charlotte, NCThreadDriver vs. The Old Way
| ThreadDriver | Self- Tappers | Nut & Bolt | |
|---|---|---|---|
| Real bolt threads | |||
| Won't strip thin metal | |||
| No back access needed | |||
| One person, one side | |||
| Stays tight with vibration | |||
| Bolt removable & reusable |
Buy It Once. Use It For Years.
ThreadDriver kits sent to garages
5 of each size, ready to go
M3, M4, M5, M6, M8 and M10
Try it on your real project
Got the right kit for the job?
Yes — when the hole is sized right and the setup is matched to the job, you get a tight set that stays put. It is built for repeatable rivnut installs, not shaky bolt-and-washer hacks.
No. Aluminum doesn't rust, even when wet, which makes it a good fit for boats, trailers and anything that lives outside. On aluminum panels it also avoids galvanic corrosion, since both parts are the same metal.
Nope. A normal cordless drill is the whole point. If your drill can run basic shop work, you are good to go.
That is where this kit shines. It helps you set strong threads in thin sheet metal without needing a weld or heavy backing access.
Absolutely. It is a solid choice for cargo vans, overland rigs, trailers, and garage fixes where you need reusable threads fast.
That is exactly the kind of repair this kit helps with. Set a rivnut in place and turn a ruined hole into a usable mounting point again.
Yep. Every size comes with matching nuts, and the steps are simple: thread on, push in, hold, drill, reverse out.
6 rivet nut adapters (M3, M4, M5, M6, M8, M10), 30 aluminum rivet nuts (5 of each size) and a clear organizer case.